EMS – for residential, commercial andindustrial metering

The versatile and reliable three-phase electronic electricity meter EMS provides a wide range of modifications: from simple to multifunctional. The meter can be customized for use in almost area: residential, commercial or industrial. The EMS meter measures either active or active and reactive electrical energy and is approved in accordance with IEC 62052-11, IEC 62053-21 and IEC 62053-23. Upon request the meter can be provided with maximum demand registration, instantaneous value measurement, load profile recording. Also, there is a possibility to connect the meter to an AMR system.

Communications

The meter has optical communication interface in accordance with IEC62056-21. Optical communication interface allows the user to read data and to program the meter in the field or in the workshop. The EMS meter has electrical communication interface (20 mA current loop or RS485) with protocol in accordance with IEC 62056-21 or IEC 62056-31, allowing connection of meters to an AMR system through external GSM/GPRS, RF, PSTN, and LAN controllers.

ENERIUM

The ENERIUM range of 144×144-format power monitors is the first range on the market to provide effective solutions for network monitoring, installation sizing, energy management and electrical network quality measurement.

The range:

• ENERIUM 50 : 96×96 mm format –harmonics up to 25th order – 2 inputs or 2 outputs – 8 load curves
• ENERIUM 100/110 : 144×144 mm format – harmonics up to 25th order – 4 inputs/4 outputs – 4 load curves – Neutral current measurement
• ENERIUM 150 : 96×96 mm format – harmonics up to 50th order – 2 inputs or 2 outputs – 8 load curves – 4 trend curves – graphs (Fresnel, bargraph,…)
• ENERIUM 200/210 : 144×144 mm format – harmonics up to 50th order – 4 inputs/4 outputs – 8 load curves– measurement indicator LED

ENERIUMis available in 2 versions:

• ENERIUM 50, 100,150 and 200: with display
• ENERIUM 110 and 210: without display

Performance:

• Energy: Class 0.5 measurement of the 4 quadrants as per IEC 62053-22
• Qualimetry : harmonics up to 50th order, THD, crest factor, power factor
• 8 load curves to be selected from 12
• 4 trend curves to be selected among the quantities measured or calculated by the product
• Harmonics display by order and by phase up to the 50th order (25th for ENERIUM 50, 100 and 110).
• Display of the electrical quantities as instantaneous, minimum, average, maximum, average minimum and average maximum values
• Up to 8 inputs/outputs: digital, pulse, analogue, alarm, metering
• Up to 8 configurable alarms each with 2 conditions “and” or “or”
• Event recording with date, time, duration and the highest value during the event
• Communication using optical head, Ethernet or RS485 output
• Firmware upgrading with new features via an optical head
• Compatible with 400Hz networks (optional)
• Version with low-level 19 – 58 Vdc supply available (optional)
• 6.4 kHz sampling rate
• 3 customizable screens

The ENERIUM is also a global solution with its associated software: E.set, E.view and E.view+

Brochure & Catalog

Brochure & Catalog

DMMS 300+ & 350

• Measures Volts, Amps, Watts, Vars, VA, PF, Frequency, Watt-Hour, VA/hour, VAR/hour
• True RMS Voltage, Current & Power Measurement
• Bi-Directional Energy & Min/Max on all Electrical Parameters
• Harmonics (%THD & K-Factor) to the 31st order
• Bright LED Display
• Standard ANSI Size for Easy Installation to New or Retrofit Panels
• Advanced Control Features
• KYZ Pulse for Energy
• Ideal Circuit Monitoring for Main Feeds, Branch Circuits, Gensets & Equipment
• On-Board Ethernet Protocol with Standard Modbus TCP, Modbus Plus-New!, Modbus RTU/ASCII & DNP 3.0.

DMMS 425

• Economical Design
• Bright LED Display
• Measures Over 80 Electrical Parameters
• Modbus, Modbus Plus or DNP 3.0
• KYZ-Pulse Outputs
• Revenue Accurate for Utility Submetering
• Standard ANSI Cutout
• Small Footprint
• The DMMS 425 measures more than 80 electrical power parameters. It’s a low-cost, multifunction solution for utility, industrial and power generation applications.
• Modbus Plus – New!, Modbus RTU/ASCII & DNP 3.0